Jwcom Smart4.0 - App Store
You'll be able to see results in few seconds.
Publisher Description
Jwcom Smart. Smart life, smart living
. Remotely control home appliances from anywhere
. Add and control multiple devices at once with one App
. Voice control via Amazon Echo and Google Home
. Inter-working of multiple smart devices. Devices automatically start/stop working based on temperature, location and time.
. Easily share devices among family members
. Receive real-time alerts to ensure safety
. Easily and quickly connect Jwcom Smart App to devices
Version History Updates e melhorias 4.0 Aug 30 Update minor 3.1.3 07/17/2025 Update.. 3.1.2 06/12/2025 App update
Optimized multi-device login
Optimized scenes
Optimized pairing experience
Security and compliance 3.1.0 05/25/2025 Optimized room control and management
Optimized pairing experience
Optimized the device latitude and longitude permission compliance 3.0.2 04/17/2025 Optimized pairing
Smart multi-mode gateway (Matter gateway): Supports 5G Wi-Fi network pairing, and wired pairing is also available.
Added Matter Thread and Matter Thread + Bluetooth Low Energy combo protocols: Added support for these protocols, further extending the compatibility of smart devices and device sharing.
Optimized the device auto discovery page: Added a prompt on this page: Tap a device icon to add the device. This prompt will not be displayed when no device is discovered.
Optimized Bluetooth device pairing: The pairing process will end if the Bluetooth device’s broadcast packet is not discovered for more than 5 seconds after starting network pairing. A prompt says The device has been waiting for too long. Please reset the device and immediately follow the steps to pair again.
Optimized the error message: When the UI package of the pairing BizBundle goes wrong, the current error message. 3.0.1 02/13/2025 update
major itens for better experience 3.0.0 01/08/2025 Minors updates 2.1.4 10/03/2024 Optimized home management and multi-device control
Optimized pairing over dual-band Wi-Fi with 2.4 GHz
Optimized quick toggles of lighting devices 2.1.3 06/07/2023 App update
Supported connection to and control of Matter devices
Optimized IPC pairing in QR code mode
Optimized login and registration experience for iOS
Optimized home settings
Platform update
Optimized app building process 2.1.1 03/15/2023 Optimized temperature unit conversion in scene linkage
Added TuyaLink-based devices by scanning QR code
Optimized temperature unit conversion on homepage
Added app review requests
Optimize the device pairing process
Optimize the multi-control switch association process
Better experience for smart scene
Optimization for Privacy Compliance
Optimize Bluetooth devices experience 2.0.1 07/13/2022 Add OTA automatic update
Support iOS user bind skill in one click
Support shift Wi-Fi network
Add more information on the NB-IoT device page
Optimization and repair
Support change account name
MQTT message compensation
Bluetooth optimaztion 2.0
Improve pairing features
Optimize device management on the homepage 1.1.0 01/11/2021 Support camera configuration guide map can be customized
Optimizated the pairing process (Because some configuration functions iot platform are still under development, they will not be released simultaneously with the public version of the app. If necessary, please contact the dedicated account manager to open) 1.0.9 03/17/2020 Add Siri function 1.0.8 10/29/2019 Fix Minor Bugs
Fix GPS
Device list sequenced
Device list improved for display visual and controlling easily
Improved device paring and enabled feedback for failed device pairing.
Supported robot vacuum with IP camera, etc.
Supported login via Facebook ou Twitter 1.0.7 09/20/2019 Better improvement design
Fix bugs
Device list sequenced
Device list improved for display visual and controlling easily
Optimize on IPC, Robot cleaner, IR controller and etc 1.0.5 06/28/2019 -Correct function for Amazon Echo and Google Home.
-Interface improvements
-Bug fix 1.04 12/12/2018 1.0.1 11/14/2018
About Jwcom Smart
The company that develops Jwcom Smart is Xiaoqin Chi. The latest version released by its developer is 4.0.
To install Jwcom Smart on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Jwcom Smart as malware if the download link is broken.
How to install Jwcom Smart on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Jwcom Smart is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Jwcom Smart is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 4.0
posted on 2026-10-13
Version History Updates e melhorias 4.0 Aug 30 Update minor 3.1.3 07/17/2025 Update.. 3.1.2 06/12/2025 App update
Optimized multi-device login
Optimized scenes
Optimized pairing experience
Security and compliance 3.1.0 05/25/2025 Optimized room control and management
Optimized pairing experience
Optimized the device latitude and longitude permission compliance 3.0.2 04/17/2025 Optimized pairing
Smart multi-mode gateway (Matter gateway): Supports 5G Wi-Fi network pairing, and wired pairing is also available.
Added Matter Thread and Matter Thread + Bluetooth Low Energy combo protocols: Added support for these protocols, further extending the compatibility of smart devices and device sharing.
Optimized the device auto discovery page: Added a prompt on this page: Tap a device icon to add the device. This prompt will not be displayed when no device is discovered.
Optimized Bluetooth device pairing: The pairing process will end if the Bluetooth device’s broadcast packet is not discovered for more than 5 seconds after starting network pairing. A prompt says The device has been waiting for too long. Please reset the device and immediately follow the steps to pair again.
Optimized the error message: When the UI package of the pairing BizBundle goes wrong, the current error message. 3.0.1 02/13/2025 update
major itens for better experience 3.0.0 01/08/2025 Minors updates 2.1.4 10/03/2024 Optimized home management and multi-device control
Optimized pairing over dual-band Wi-Fi with 2.4 GHz
Optimized quick toggles of lighting devices 2.1.3 06/07/2023 App update
Supported connection to and control of Matter devices
Optimized IPC pairing in QR code mode
Optimized login and registration experience for iOS
Optimized home settings
Platform update
Optimized app building process 2.1.1 03/15/2023 Optimized temperature unit conversion in scene linkage
Added TuyaLink-based devices by scanning QR code
Optimized temperature unit conversion on homepage
Added app review requests
Optimize the device pairing process
Optimize the multi-control switch association process
Better experience for smart scene
Optimization for Privacy Compliance
Optimize Bluetooth devices experience 2.0.1 07/13/2022 Add OTA automatic update
Support iOS user bind skill in one click
Support shift Wi-Fi network
Add more information on the NB-IoT device page
Optimization and repair
Support change account name
MQTT message compensation
Bluetooth optimaztion 2.0
Improve pairing features
Optimize device management on the homepage 1.1.0 01/11/2021 Support camera configuration guide map can be customized
Optimizated the pairing process (Because some configuration functions iot platform are still under development, they will not be released simultaneously with the public version of the app. If necessary, please contact the dedicated account manager to open) 1.0.9 03/17/2020 Add Siri function 1.0.8 10/29/2019 Fix Minor Bugs
Fix GPS
Device list sequenced
Device list improved for display visual and controlling easily
Improved device paring and enabled feedback for failed device pairing.
Supported robot vacuum with IP camera, etc.
Supported login via Facebook ou Twitter 1.0.7 09/20/2019 Better improvement design
Fix bugs
Device list sequenced
Device list improved for display visual and controlling easily
Optimize on IPC, Robot cleaner, IR controller and etc 1.0.5 06/28/2019 -Correct function for Amazon Echo and Google Home.
-Interface improvements
-Bug fix 1.04 12/12/2018 1.0.1 11/14/2018
version 4.0
posted on 2026-09-04
Version History Updates e melhorias 4.0 4d ago Update minor 3.1.3 07/17/2025 Update.. 3.1.2 06/12/2025 App update
Optimized multi-device login
Optimized scenes
Optimized pairing experience
Security and compliance 3.1.0 05/25/2025 Optimized room control and management
Optimized pairing experience
Optimized the device latitude and longitude permission compliance 3.0.2 04/17/2025 Optimized pairing
Smart multi-mode gateway (Matter gateway): Supports 5G Wi-Fi network pairing, and wired pairing is also available.
Added Matter Thread and Matter Thread + Bluetooth Low Energy combo protocols: Added support for these protocols, further extending the compatibility of smart devices and device sharing.
Optimized the device auto discovery page: Added a prompt on this page: Tap a device icon to add the device. This prompt will not be displayed when no device is discovered.
Optimized Bluetooth device pairing: The pairing process will end if the Bluetooth device’s broadcast packet is not discovered for more than 5 seconds after starting network pairing. A prompt says The device has been waiting for too long. Please reset the device and immediately follow the steps to pair again.
Optimized the error message: When the UI package of the pairing BizBundle goes wrong, the current error message. 3.0.1 02/13/2025 update
major itens for better experience 3.0.0 01/08/2025 Minors updates 2.1.4 10/03/2024 Optimized home management and multi-device control
Optimized pairing over dual-band Wi-Fi with 2.4 GHz
Optimized quick toggles of lighting devices 2.1.3 06/07/2023 App update
Supported connection to and control of Matter devices
Optimized IPC pairing in QR code mode
Optimized login and registration experience for iOS
Optimized home settings
Platform update
Optimized app building process 2.1.1 03/15/2023 Optimized temperature unit conversion in scene linkage
Added TuyaLink-based devices by scanning QR code
Optimized temperature unit conversion on homepage
Added app review requests
Optimize the device pairing process
Optimize the multi-control switch association process
Better experience for smart scene
Optimization for Privacy Compliance
Optimize Bluetooth devices experience 2.0.1 07/13/2022 Add OTA automatic update
Support iOS user bind skill in one click
Support shift Wi-Fi network
Add more information on the NB-IoT device page
Optimization and repair
Support change account name
MQTT message compensation
Bluetooth optimaztion 2.0
Improve pairing features
Optimize device management on the homepage 1.1.0 01/11/2021 Support camera configuration guide map can be customized
Optimizated the pairing process (Because some configuration functions iot platform are still under development, they will not be released simultaneously with the public version of the app. If necessary, please contact the dedicated account manager to open) 1.0.9 03/17/2020 Add Siri function 1.0.8 10/29/2019 Fix Minor Bugs
Fix GPS
Device list sequenced
Device list improved for display visual and controlling easily
Improved device paring and enabled feedback for failed device pairing.
Supported robot vacuum with IP camera, etc.
Supported login via Facebook ou Twitter 1.0.7 09/20/2019 Better improvement design
Fix bugs
Device list sequenced
Device list improved for display visual and controlling easily
Optimize on IPC, Robot cleaner, IR controller and etc 1.0.5 06/28/2019 -Correct function for Amazon Echo and Google Home.
-Interface improvements
-Bug fix 1.04 12/12/2018 1.0.1 11/14/2018
version 3.1.3
posted on 2026-08-22
Version History Update minor 3.1.3 07/17/2025 Update.. 3.1.2 06/12/2025 App update
Optimized multi-device login
Optimized scenes
Optimized pairing experience
Security and compliance 3.1.0 05/25/2025 Optimized room control and management
Optimized pairing experience
Optimized the device latitude and longitude permission compliance 3.0.2 04/17/2025 Optimized pairing
Smart multi-mode gateway (Matter gateway): Supports 5G Wi-Fi network pairing, and wired pairing is also available.
Added Matter Thread and Matter Thread + Bluetooth Low Energy combo protocols: Added support for these protocols, further extending the compatibility of smart devices and device sharing.
Optimized the device auto discovery page: Added a prompt on this page: Tap a device icon to add the device. This prompt will not be displayed when no device is discovered.
Optimized Bluetooth device pairing: The pairing process will end if the Bluetooth device’s broadcast packet is not discovered for more than 5 seconds after starting network pairing. A prompt says The device has been waiting for too long. Please reset the device and immediately follow the steps to pair again.
Optimized the error message: When the UI package of the pairing BizBundle goes wrong, the current error message. 3.0.1 02/13/2025 update
major itens for better experience 3.0.0 01/08/2025 Minors updates 2.1.4 10/03/2024 Optimized home management and multi-device control
Optimized pairing over dual-band Wi-Fi with 2.4 GHz
Optimized quick toggles of lighting devices 2.1.3 06/07/2023 App update
Supported connection to and control of Matter devices
Optimized IPC pairing in QR code mode
Optimized login and registration experience for iOS
Optimized home settings
Platform update
Optimized app building process 2.1.1 03/15/2023 Optimized temperature unit conversion in scene linkage
Added TuyaLink-based devices by scanning QR code
Optimized temperature unit conversion on homepage
Added app review requests
Optimize the device pairing process
Optimize the multi-control switch association process
Better experience for smart scene
Optimization for Privacy Compliance
Optimize Bluetooth devices experience 2.0.1 07/13/2022 Add OTA automatic update
Support iOS user bind skill in one click
Support shift Wi-Fi network
Add more information on the NB-IoT device page
Optimization and repair
Support change account name
MQTT message compensation
Bluetooth optimaztion 2.0
Improve pairing features
Optimize device management on the homepage 1.1.0 01/11/2021 Support camera configuration guide map can be customized
Optimizated the pairing process (Because some configuration functions iot platform are still under development, they will not be released simultaneously with the public version of the app. If necessary, please contact the dedicated account manager to open) 1.0.9 03/17/2020 Add Siri function 1.0.8 10/29/2019 Fix Minor Bugs
Fix GPS
Device list sequenced
Device list improved for display visual and controlling easily
Improved device paring and enabled feedback for failed device pairing.
Supported robot vacuum with IP camera, etc.
Supported login via Facebook ou Twitter 1.0.7 09/20/2019 Better improvement design
Fix bugs
Device list sequenced
Device list improved for display visual and controlling easily
Optimize on IPC, Robot cleaner, IR controller and etc 1.0.5 06/28/2019 -Correct function for Amazon Echo and Google Home.
-Interface improvements
-Bug fix 1.04 12/12/2018 1.0.1 11/14/2018
version 3.1.3
posted on 2025-07-17
Update minor
version 3.1.3
posted on 2025-07-17
Jul 17, 2025
Version 3.1.3
Update minor
version 3.1.0
posted on 2025-05-25
May 25, 2025
Version 3.1.0
App update
Optimized multi-device login
Optimized scenes
Optimized pairing experience
Security and compliance
version 3.0.2
posted on 2025-04-17
Apr 17, 2025
Version 3.0.2
Optimized room control and management
Optimized pairing experience
Optimized the device latitude and longitude permission compliance
version 3.0.1
posted on 2025-02-13
Feb 13, 2025
Version 3.0.1
Optimized pairing
Smart multi-mode gateway (Matter gateway): Supports 5G Wi-Fi network pairing, and wired pairing is also available.
Added Matter Thread and Matter Thread + Bluetooth Low Energy combo protocols: Added support for these protocols, further extending the compatibility of smart devices and device sharing.
Optimized the device auto discovery page: Added a prompt on this page: Tap a device icon to add the device. This prompt will not be displayed when no device is discovered.
Optimized Bluetooth device pairing: The pairing process will end if the Bluetooth device’s broadcast packet is not discovered for more than 5 seconds after starting network pairing. A prompt says The device has been waiting for too long. Please reset the device and immediately follow the steps to pair again.
Optimized the error message: When the UI package of the pairing BizBundle goes wrong, the current error message.
version 3.0.0
posted on 2025-01-08
Jan 8, 2025
Version 3.0.0
update
major itens for better experience
version 2.1.4
posted on 2024-10-03
Oct 3, 2024
Version 2.1.4
Minors updates
Disclaimer
Official App Store Link
We do not host Jwcom Smart on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Jwcom Smart is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
